POWDER COATING & SURFACE MODIFICATION

Cell Mill: drying, depolymerization, modification, and modification

Cell mill is a mechanical grinding machine that advocates the practical process of first depolymerization and then drying, and synchronous surface treatment. It is specifically designed for the production of ultrafine powders with strict requirements for particle size distribution.

Honeycomb mill is a mechanical grinding machine that advocates the practical process of first depolymerization and then drying, and synchronous surface treatment. It is specifically designed for the production of ultrafine powders with strict requirements for particle size distribution.
Simultaneously achieve grinding, drying, sorting, and surface chemical treatment with powder, while drying and depolymerizing wet grinding filter cake and slurry.
The minimum processing capacity is 0.05 tons/hour, the maximum is 15 tons/hour, and the maximum water evaporation capacity is 3 tons/hour.
According to the diversity of materials, different materials can be used inside the equipment, which have the advantages of retaining the color and purity of the materials. The coating rate can reach 99.2%, and the activation rate can reach 99.8%.

Fitur Produk

Kecepatan rotor dapat disesuaikan, hingga 160m/s.
Suhu udara panas desain pengeringan, hingga 450℃.
Pasang nozel injeksi pengubah pada rongga gilingan.
Desain klasifikasi bawaan dapat mengontrol ukuran partikel produk dengan lebih baik.
Kekuatan geser yang kuat, cocok untuk menghancurkan material keras dan berserat.
Kecepatan penghancuran yang cepat, cocok untuk menghancurkan material yang peka terhadap panas, dan sistem proses pendinginan dapat ditambahkan untuk material dengan titik leleh yang sangat rendah.
Sesuai dengan kebutuhan proyek yang berbeda, kami memiliki desain blade dan desain liner yang berbeda.
Bahan utama bisa berupa baja karbon, baja tahan aus, baja tahan karat.
Bahan pisau dapat memilih baja tahan aus, baja tahan karat, tungsten karbida.
Bahan pelat pelapis dapat memilih baja karbon, baja tahan aus, baja tahan karat, keramik alumina.

Prinsip bekerja

The main component is a vertically installed multi-stage disassembly wheel, each stage of disassembly wheel consisting of two supporting discs mounted on the main shaft and clamping 200 blades. According to specific load requirements, a honeycomb mill can install 10 disassembly wheel components and a maximum of 2000 disassembly blades. The blades rotate at a speed of 110 meters per second, and the grinding groove of 6 millimeters is a unique reinforcing rib type fixed lining. 160 turbulent “honeycombs” are formed between the blades and the lining, and the pressure, shear force, and friction between them can quickly grind the material into ultrafine powder.

Parameter Produk

Model	MRD-1	MRD-2	MRD-3	MRD-4	MRD-5	MRD-6
Grinding Motor Power (kW)	45	90	160	200	315	450
Classifying Motor Power (kW)	5.5	7.5	15	22	37	55
Blade (layer)	3-6	4-7	5-8	5-8	5-8	6-10
Air volume (m3/h)	4,500	7,000	12,000	16,000	24000	36,000

Catatan: Kapasitas produksi berkaitan erat dengan ukuran partikel, berat jenis, kekerasan, kelembapan, dan indikator bahan baku lainnya. Di atas hanya untuk referensi seleksi.