POWDER COATING & SURFACE MODIFICATION

Cell Mill: drying, depolymerization, modification, and modification

Cell mill is a mechanical grinding machine that advocates the practical process of first depolymerization and then drying, and synchronous surface treatment. It is specifically designed for the production of ultrafine powders with strict requirements for particle size distribution.

Honeycomb mill is a mechanical grinding machine that advocates the practical process of first depolymerization and then drying, and synchronous surface treatment. It is specifically designed for the production of ultrafine powders with strict requirements for particle size distribution.
Simultaneously achieve grinding, drying, sorting, and surface chemical treatment with powder, while drying and depolymerizing wet grinding filter cake and slurry.
The minimum processing capacity is 0.05 tons/hour, the maximum is 15 tons/hour, and the maximum water evaporation capacity is 3 tons/hour.
According to the diversity of materials, different materials can be used inside the equipment, which have the advantages of retaining the color and purity of the materials. The coating rate can reach 99.2%, and the activation rate can reach 99.8%.

Ciri-ciri Produk

Kelajuan rotor boleh dilaraskan, sehingga 160m/s.
Suhu udara panas reka bentuk pengeringan, sehingga 450 ℃.
Tetapkan muncung suntikan pengubah suai pada rongga kilang.
Reka bentuk pengelasan terbina dalam boleh mengawal saiz zarah produk dengan lebih baik.
Daya ricih yang kuat, sesuai untuk menghancurkan bahan yang keras dan berserabut.
Kelajuan penghancuran pantas, sesuai untuk menghancurkan bahan sensitif haba, dan sistem proses penyejukan boleh ditambah untuk bahan dengan takat lebur yang sangat rendah.
Mengikut keperluan projek yang berbeza, kami mempunyai reka bentuk bilah dan reka bentuk pelapik yang berbeza.
Bahan utama boleh menjadi keluli karbon, keluli tahan haus, keluli tahan karat.
Bahan bilah boleh memilih keluli tahan haus, keluli tahan karat, tungsten karbida.
Bahan plat lapisan boleh memilih keluli karbon, keluli tahan haus, keluli tahan karat, seramik alumina.

Prinsip Kerja

The main component is a vertically installed multi-stage disassembly wheel, each stage of disassembly wheel consisting of two supporting discs mounted on the main shaft and clamping 200 blades. According to specific load requirements, a honeycomb mill can install 10 disassembly wheel components and a maximum of 2000 disassembly blades. The blades rotate at a speed of 110 meters per second, and the grinding groove of 6 millimeters is a unique reinforcing rib type fixed lining. 160 turbulent “honeycombs” are formed between the blades and the lining, and the pressure, shear force, and friction between them can quickly grind the material into ultrafine powder.

Parameter Produk

Model	MRD-1	MRD-2	MRD-3	MRD-4	MRD-5	MRD-6
Grinding Motor Power (kW)	45	90	160	200	315	450
Classifying Motor Power (kW)	5.5	7.5	15	22	37	55
Blade (layer)	3-6	4-7	5-8	5-8	5-8	6-10
Air volume (m3/h)	4,500	7,000	12,000	16,000	24000	36,000

Nota: Kapasiti pengeluaran berkait rapat dengan saiz zarah, graviti tentu, kekerasan, kelembapan dan penunjuk lain bahan mentah. Di atas hanya untuk rujukan pemilihan.