Air Classifier ITC - EPIC Powder Equipment

Pengelas Udara Menegak - ITC

ITC series air classifier is designed by our engineers and optimized by our German experts, it is specially used for efficient dry classification of d97 5 micron – d97 200 micron powder. Its most critical component is its internal classifying rotor that can rotate at high speed, and the classifying rotor is installed vertically. The classifier, cyclone, dust collector and induced draft fan form a complete classification system. Under the gravitational force of the induced draft fan, the material quickly enters the classification area from the inlet of the classifier with the airflow of the fan; the classifying rotor rotating at high speed generates a strong centrifugal force to block the coarse particles, so that the coarse particles cannot pass through the gap between the blades of the classification wheel. At the same time, the gravity of the fan partially overcomes the centrifugal force and sucks away the fine powder. The fine powder passes through the gap between the blades of the classifying wheel and enters the cyclone collector or directly enters the dust collector, thus achieving the purpose of separating coarse and fine powder. Coarse particles entrain some fine particles and lose speed after hitting the wall, and descend to the secondary tuyere along the cylinder wall. After the strong elutriation and dispersion of the secondary air, the coarse and fine particles are further separated, and the fine particles rise to the classification area for secondary classification. The particles descend to the discharge port for discharge, or are sent back to the crushing equipment for further crushing and grinding.

Ciri-ciri Produk

Ia sangat baik untuk pemotongan puncak produk ultra halus dan produk sederhana halus.
Berkenaan dengan pelbagai saiz zarah, yang paling kasar boleh mencapai 200 mikron.
Terdapat model yang berbeza untuk memenuhi output yang berbeza, dan kapasiti suapan model terbesar boleh mencapai 800t/j.
Reka bentuk tahan haus, boleh mengendalikan produk serbuk dengan kekerasan yang sangat tinggi.
Reka bentuk peredaran udara dalaman boleh mengurangkan pelaburan dan menjimatkan ruang lantai.
Ia boleh digabungkan dengan kilang bebola untuk membentuk sistem pengeluaran litar tertutup untuk mengisar pelbagai bahan.

Prinsip Kerja

Under the action of the fan, the material moves to the classification area at a high speed from the lower inlet of the classifier with the updraft. Under the action of the strong centrifugal force generated by the high-speed rotating classification turbine, the material is separated, and the fine particles meeting the particle size requirements enter the cyclone separator or dust collector through the blade gap of the classification wheel for collection. The velocity of some fine particles entrained by coarse particles disappears after hitting the wall, and then decreases to the secondary air outlet along the wall of the cylinder. Through the strong washing effect of the secondary air, the coarse and fine particles are separated, the fine particles rise to the secondary classification in the classification area, and the coarse particles drop to the discharge port for discharge.

Parameter Produk

Parameter / Model	ITC-S2	ITC-S1	ITC-1	ITC-2	ITC-3	ITC-4	ITC-5	ITC-6	ITC-7	ITC-8	ITC-9
Particle size (D97:µm)	5-100	6-150	8-150	8-150	10-150	15-150	20-150	25-150	25-150	25-150	30-150
Classification efficiency (η)	60~90%	60~90%	60~90%	60~90%	60~90%	60~90%	60~90%	60~90%	60~90%	60~90%	60~90%
Classifier motor (kW)	4	7.5	11	15	22	37	37-45	45	55	75	110
Air volume (m³/h)	1200	2700	3900	6000	11000	17000	30000	43000	77000	120000	150000

Nota: Kapasiti pengeluaran berkait rapat dengan saiz zarah, graviti tentu, kekerasan, kelembapan dan penunjuk lain bahan mentah. Di atas hanya untuk rujukan pemilihan.